Material: plastic and metal
Hose length: 5 feet
Hose connector: 1/4 “SAE
Burst pressure: 4000psi
Maximum working pressure: 800psi
Blue table (low): 0-500psi
Red indicator (high): 0-800psi
High configuration, fine craftsmanship, excellent quality
Suitable for automobile parts, the blow molding box is made of high-quality plastic material, well-made, sturdy and durable, has good wear resistance, and effectively improves the service life of the product.
The internal card slot adopts embedded tool storage, which makes the tool and the box more densely integrated, effectively prevents the tool from slipping during storage, avoids the wear and injury caused by the collision of the tools, and improves the neatness of the placement space. It is also convenient to better find the tools you need during operation.
The screwdriver can only be used with manual and loose screws, and cannot be used as a prying tool. When you want to pry the work, please use an appropriate prying tool;
Pliers can only be used for clamping work, not as a percussion tool;
The wrench cannot be knocked, nor can it be used as a knocking tool, and the handle (sleeve long tube) cannot be used when it is used;
Please choose a hammer of the correct weight, and use eye protection to protect your eyes;
Please do not use electrician tools in high voltage situations;
After long-term use of the pliers, add lubricating oil to the twisting place to prolong the service life of the product;
When using punching products, please wear eye protection to protect your eyes;
Use the correct anti-rust oil to wipe the product to prevent rust;
Without adult supervision, keep children away from the tool.
Maintenance and use of hand tools:
Confucius said: “Workers must first sharpen their tools if they want to do well.” To complete each processing or assembly task perfectly, you must first equip the right tools. Hardware tools can’t be used without maintenance, as that will reduce the service life of hardware tools. Please use and maintain your tools reasonably.
(1) Maintenance of hand tools:
All tools should be inspected and maintained regularly. After each use, please wipe clean the surface stains of the tools. If it is a metal product, please apply anti-rust oil to prevent rust.
In case of malfunction or damage, repair it immediately. Damaged tools are likely to cause injury.
Before using the tool, you should know the correct method and scope of use, and select the appropriate tool for maintenance. Tools that have not been used for a long time still need to be maintained.
All hand tools must be used in accordance with the designed purpose. The use of tools is prohibited before they are installed. Never use damaged or defective tools.
(2) The principle of safe use of hand tools:
①Choose hand tools that suit the needs of the work; ②Keep the tools in good condition; ③Choose hand tools with good materials; ④Check the hand tools before use; ⑤Use hand tools in the correct way. ⑥Hand tools should be placed in a safe place; ⑦Wear appropriate protective equipment before work; ⑧Use standard tools or prescribed tools.
Fill refrigerant, use FO’s high-pressure refrigerant meter group for flow measurement and control. There are two composite pressure gauges, hooks and three 36-inch red, yellow, blue and white oak tubes.
The soft angle seat valve design of the refrigerant meter group-dynamic flow precision double O-ring seal design to ensure faster and accessible emptying and filling process.
The red bracket is: high pressure
Yellow is: refrigerant
Blue is: low pressure
Features of AC refrigerant meter set: easy to read readings and accurate display; rubber sheath to prevent damage to the pressure gauge; glass observation hole, where the user can observe the flow of refrigerant, built-in ball valve, easy to open and close; high Accuracy, pressure gauge with an outer diameter of 80mm, accuracy class 1.6
5/16″ SAE connector:
Pressure gauge with a diameter of 80mm with a rubber sheath;
800 pounds of hose working pressure
4000PSI hose burst pressure
Equipped with 500/16″ SAE adapter, 1/4″ SAE