Paintless Dent Repair Puller Kit – Dent Puller Slide Hammer T-Bar Tool with 16pcs Dent Removal Pulling Tabs for Car Auto Body Hail Damage Remover
The slide hammer T bar puller tool uses a lever-type design for metal panel dent repair works, and can also be decomposed into two different T bar, clever two wayr of use.
Puller Kit are suitable for use by anyone.can be repaired against a variety of dents, dent repair lifter can also be adjusted, according to the size of the dent can be adjusted.
Newly designed T bar puller are made of stainless steel. They are durable and corrosion resistant, with high quality and easy to store. Anyone can handle the removal of dents, easy to use.
Environmental protection, high quality, high service, quick and effective help you remove the repair dents, become a great tool and a good assistant for repairing your car.
1* Car Dent Puller Tools
18* Blue Glue Tabs/ Lifter Glue Puller
Only the above package content, other products are not included.
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Choice the proper drawing gasket, you have 16 sizes gasket, Large dent requires a large drawing gasket.
4.Pull the trigger and apply the drawing gasket with extruded glue.
5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 3-5 minutes. The cooling time should be less than 8 minutes and should be shorter slightly in winter);
6.While use this dent removel T Bar tools, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a knockdown tool.
8.Use alcohol and plastic shovel to clean up the residual glue.